Omega DP461-S - Figure 14-2 4 Relay Board Jumpers and Plugs

14-2
Relay Options
14
Figure 14-2 below show the locations of the 4 Relay Output Board jumpers,
the P10 plug connecting the board to the Main Board, and the positions of
P6, P7 and P18, the output plugs.
Figure 14-2. 4 Relay Board Jumpers and Plugs.
Table 14-2 shows which jumpers are assigned to each relay. Defaults have
asterisks.
Table 14-2. 4 Relay Board Jumpers.
S1 S2 FUNCTION
Assigns SP1 to Relay 1 (P6)
A, C* A, C* Assigns SP2 to Relay 2 (P7)
Assigns SP3 to Relay 3 (P18)
Assigns SP4 to Relay 4 (P18)
Assigns SP1 to Relay 3 (P18)
Assigns SP2 to Relay 2 (P7)
B, D A, C Assigns SP3 to Relay 1 (P6)
Assigns SP4 to Relay 4 (P18)
Assigns SP1 to Relay 3 (P18)
Assigns SP2 to Relay 4 (P18)
B, D B, D Assigns SP3 to Relay 1 (P6)
Assigns SP4 to Relay 2 (P7)
Assigns SP1 to Relay 1 (P6)
Assigns SP2 to Relay 4 (P18)
A, C B, D Assigns SP3 to Relay 3 (P18)
Assigns SP4 to Relay 2 (P7)
P10
1
2
3
1
2
3
1
2
3
4
5
6
P6
P7
P18