Omega DP461-S - Page 169

19-2
Factory Preset Values
19
Decimal Point “DEC PT” Position: FFFFFF.
Count By “CNT BY”: 001
Filter Configuration “FIL.CNF”: FIL.1=0 FIL.2=1 FIL.3=1
Filter Time Constant “FIL TI”: 064
Setpoint Configuration “SP CNF”:
SPC.1=0 SPC.2=0 SPC.3=1 SPC.4=0
SPC.5=0 SPC.6=1 SPC.7=0 SPC.8=0
Alarm Configuration “AL CNF”:
ALC.1=0 ALC.2=0 ALC.3=1 ALC.4=0
ALC.5=0 ALC.6=1 ALC.7=0 ALC.8=0
Alarm Function “AL FNC”:
ALF.1=0 ALF.2=0 ALF.3=0 ALF.4=0
Alarm Number of Readings “AL RDG”: 03 03 for (AL1) (AL2)
Setpoints 1 & 2 Deadband “SP DB”: 0020
Alarms 1 & 2 Deadband “AL DB”: 0020
Output Configuration “OUT.CNF”:
OUT.1=0 OUT.2=1 OUT.3=0 OUT.4=0
OUT.5=1 OUT.6=0
Output Scale and Offset “OT.SC.OF”:
READ 1: 000000. OUTPT 1: 04.0000
READ 2: 100000. OUTPT 2: 20.0000
Baud Rate “BAUD”: 09600
Serial Communication Configuration “SERCNF”:
SER.1=1 SER.2=0
Address “ADDRES” (for RS-485): 001