3. OPERATION:
Note: Before the unit can be operated, it must either be ducted.
1. Connect the plug into the power.
2. Push ‘Stop’ button, the motor will stop.
3. Push the ‘Low’ button, the motor runs at low speed.
4. Push the ‘Mid’ button, the motor runs at mid speed.
5. Push the ‘High’ button, the motor runs at high speed.
6. Push the ‘Light’ button and the two lights will be on. Push it again and the
light will turn off.
If your range hood does not function correctly when attempting any of the
above, please ensure that your power is on and is functioning correctly. If the
power seems to be functioning correctly in the house, there may be a problem
with the range hood. Please call your authorized service agent in this case to
organise a service call.
5
To Next Page
Loading...
Need help?
General
