Omega Speedmaster X-33 Marstimer - PRESENTATION NAVIGATION AND PROGRAMMING; Programming mode; To reset a programmable function

18
English
PRESENTATION NAVIGATION AND PROGRAMMING
The functions of the Speedmaster X-33 Marstimer are separated into 2 groups. You can navigate
between functions using the pushers P1 and P2. Simply pressing the crown will, according to the
selected function, enter, exit or display more information on it. Pressing and holding the crown will
toggle between 2 groups of functions.
In programming mode, the hands move so as to clear the displays.
Programming mode exited automatically after 20 seconds without activity.
When a chime sounds, the displayashes and brings up the function concerned.
To reset a programmable function, enter programming mode for the function, and then select
to
erase the programming.
To use the functions on your Speedmaster X-33 Marstimer, there are two examples of missions
available  pages 46 and 48.