Omega Speedmaster X-33 Marstimer - PET (PE1, PE2 & PE3) - PHASE ELAPSED TIME - PROGRAMMING; Absolute programming (as per UTC, T1, T2, MTC, M 1, M2 or MLS):; year, month, day, hour, minute, seconds (UTC, T1, T2 only); sol, Martian hour, Martian minute, Martian seconds (MTC, M 1 and M2 only)

31
121 22
0051 23
Exit programming mode
pEt (pE1, pE2 & pE3) - phasE ElapsEd timE - proGramminG
Absolute programming (as per , or ):
• year, month, day, hour, minute, seconds (
, , only)
• sol, Martian hour, Martian minute, Martian seconds (
, and only)
• Martian solar longitude (
only)
A rst alarm sounds for 1 minute before the end of the count, and then again at the end of the count for
20 seconds.
continues to count the elapsed time since the event.
To stop an alarm, press any pusher.
To erase the programming, enter programming mode and then select .