36
English
0
000200
0
000035
tmr - timEr - display
The timer function allows you to count down a pre-dened time period, and then count the
elapsed time after passing zero.
(1)
At the end of the countdown, the " " sign appears in place of the " " sign, and the time is counted
from the countdown zero point.
The can be programmed up to a count of 99 days, 23 hours, 59 minutes, and 59 seconds.
For information about the chimes see page 45.
Before the end of the
countdown
(1)
After the end of the
countdown
(1)
Number of days elapsed
Time stopped indicator
(
)
Split time indicator ( )
Selected function
Programmed time
Time count:
- time remaining before deadline " " or
- time passed after countdown "
"
Before or during the countdown After the countdown
Number of days
programmed