2 About this manual
This manual was written for professional specialists in electronics and electrical engineering. Its
purpose is to familiarize you with the COMPANO 100 test set and its various application fields. It
contains helpful instructions on how to use COMPANO 100 safely, properly, and efficiently.
Following these instructions will help you to prevent danger, repair costs and possible down time due
to incorrect operation. Furthermore, it ensures the reliability and life-cycle of COMPANO 100.
Note: Use COMPANO 100 in observance of all existing safety requirements from national standards
for accident prevention and environmental protection.
Reading the COMPANO 100 manual alone does not release you from the duty of complying with all
national and international safety regulations relevant for working with COMPANO 100, for example,
the regulation EN50191 "Erection and Operation of Electrical Test Equipment”.
Safety symbols used in this manual
DANGER
Death or severe injury will occur if the appropriate safety instructions are not
observed.
WARNING
Death or severe injury can occur if the appropriate safety instructions are not
observed.
CAUTION
Minor or moderate injury may occur if the appropriate safety instructions are not
observed.
NOTICE
Equipment damage or loss of data possible
About this manual
OMICRON
5
To Next Page
Loading...
