Omni 4000 Series - Page 126

OMNI 4000/7000 Installation Guide – Rev H
4-66
Configuration
5.
After you complete each screen, click
Apply to save your changes.
6.
Select Meter Temperature to display the
configuration options.
7.
Select an I/O Point using the
drop-down box.
8.
a. Fill in the remaining information in
the Meter Temperature screen.
b. When you are finished, click Apply
to save the changes.
9.
Select Meter Pressure to display its
configuration options.
10.
Select an I/O Point using the
drop-down box.
Press F1 to access
OMNICONNECT Help for
assistance.
Press F1 to access
OMNICONNECT Help for
assistance.