Omni 4000 Series - Page 134

OMNI 4000/7000 Installation Guide – Rev H
4-74
Configuration
Ethernet Network Printer
1.
Click and expand Ports in the Configure
tree in the left panel to display its
configuration settings in the screen on the
right.
2.
Under DE-1, click an Ethernet port to view
the Ethernet Configuration window.
3.
a. Check Physical Connection to
confirm the location of the Ethernet
port you want to use for the printer.
b. Click Configure DE to view the
Ethernet Configuration window.
4.
Fill in the information in the fields for a
Printer screen, as necessary.
5.
Complete setup for additional Printer
screens.
Click OK when all network printers are
configured.
Press F1 to access
OMNICONNECT Help for
assistance.