Omni 4000 Series - Page 4

OMNI 4000/7000 Installation Guide – Rev H
iii
© Copyright 2016-2020 OMNI Flow Computers, Inc. All rights reserved.
Electronically published by OMNI Flow Computers, Inc. in the United States
of America.
4.10 Configure the OMNI 4000/7000 ............................................................................................... 4-54
4.10.1 General Setup .......................................................................................................... 4-54
4.10.2 Setup the Equipment List ......................................................................................... 4-55
4.10.3 Configure Input and Output Channels ...................................................................... 4-56
4.10.4 Configure Ports ........................................................................................................ 4-61
4.10.5 Assign I/O to a Meter Run ........................................................................................ 4-63
4.10.6 Configure Products ................................................................................................... 4-69
4.10.7 Configure Provers .................................................................................................... 4-72
4.10.8 Configure a Printer ................................................................................................... 4-73
4.10.9 Configure Report Setup ........................................................................................... 4-75
4.10.10 Configure Batch ....................................................................................................... 4-76
4.10.11 Peer to Peer Protocol .............................................................................................. 4-76
5. Calibration ........................................................................................................................ 5-1
5.1 Calibrate Using the Front Panel ................................................................................................. 5-1
5.1.1 Input Calibration ......................................................................................................... 5-1
5.1.2 Output Calibration ...................................................................................................... 5-6
5.2 Calibrate Using OMNICONNECT
®
............................................................................................ 5-9
5.2.1 Analog Inputs ............................................................................................................. 5-9
5.2.2 Analog Outputs ......................................................................................................... 5-13
6. Acceptance Testing Guidelines ........................................................................................ 6-1
6.1 Acceptance Testing Participants ............................................................................................... 6-1
6.2 Acceptance Test Procedure ...................................................................................................... 6-2
6.3 Acceptance Test Tools .............................................................................................................. 6-2
6.4 Prepare for Acceptance Testing ................................................................................................ 6-2
6.5 Post Acceptance Testing ........................................................................................................... 6-3
6.5.1 Acceptance Testing Action Items ............................................................................... 6-3
6.5.2 Records ...................................................................................................................... 6-3
6.6 Acceptance Test Procedure Checklist ....................................................................................... 6-4
7. Troubleshooting ............................................................................................................... 7-1
7.1 Calibration .................................................................................................................................. 7-1
7.1.1 Reset Individual Channels ......................................................................................... 7-1
7.1.2 Reset Multiple Channels ............................................................................................ 7-2
7.2 Troubleshooting Tables ............................................................................................................. 7-1
7.2.1 Hardware .................................................................................................................... 7-1
7.2.2 Alarms ........................................................................................................................ 7-8
8. Technical Specifications ................................................................................................... 8-1
Appendix A. Jumper Settings ............................................................................................. A-1