OMNI 4000/7000 Operations and Maintenance Guide – Rev F
© Copyright 2016-2020 OMNI Flow Computers, Inc. All rights reserved.
Electronically published by OMNI Flow Computers, Inc. in the United States
of America
OMNICONNECT
®
screen, window, field
and button labels are bolded:
• Click Apply to save any selections or
any edits made to fields before moving
to the next screen.
• In the Setup Sites window, click Add
Site to open the Setup
Communications window.
A white box outlined in blue in an
instructional step provides information that
you need to know.
F1 in an instruction step is a prompt for
you to go to OMNICONNECT Help for
additional details to perform an action.
Your cursor must be on the
OMNICONNECT screen for F1 to open to
the correct help content.
Boxes with icons provide information. When an icon alerts you to a potential safety concern,
observe these precautions to prevent injury to people or damage to equipment.
The tip icon indicates additional information about the current topic.
The bookmark icon indicates a reference to another guide in this series.
WARNING:
The warning icon indicates a definite risk of danger to personnel or damage to
equipment. Failure to observe and follow proper procedures could result in serious
or fatal injury to personnel or significant property loss or equipment damage.
CAUTION:
The caution icon indicates a potential risk of injury to personnel or damage to
equipment. Take extreme care when performing operations or procedures preceded
by this symbol.
This will help you complete the
action.
Press F1 to access
OMNICONNECT Help
for assistance.
To Next Page
Loading...
Need help?
General
