Omni 4000 Series - Batch Status

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
6-4
Front Panel Operations
6.2 Batch Status
To access a snapshot of the current batch status, follow these instructions:
1.
a. In the Home menu, use the arrow
navigation keys to go to and select
Batch.
b. Press the OK key.
2.
The Batch screen displays a simple status
of the batches and Stations.
To see the Batch Detail screen for any of
these items, use the navigation keys to
highlight a batch or Station in blue, and
press OK.
The Control, Stacks, Recalc and Reports function keys along the bottom of the
Batch screen connect to their respective operations as outlined in the
following sections:
• Control – Section 6.6.5: Batch Control/Ending a Batch
• Stacks – Section 6.6.5: Edit Batch Stacks
• Recalc – Section 6.6.5: Recalculate Previous Batches
• Reports – Section 6.4 Front Panel Reports