Omni 4000 Series - Page 120

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
6-17
Front Panel Operations
3.
a. Use the arrow keys to select one of
the following operations:
• Batch Control
(go to Section 6.6.5: Batch
Control/Ending a Batch)
• Edit Batch Stacks
(go to Section 6.6.5: Edit Batch
Stacks)
• Recalc Prev Batch
(go to Section 6.6.5: Recalculate
Previous Batches)
b. Press OK.
Batch Control/Ending a Batch
To access batch control operations, follow these instructions:
1.
a. From the Batch Operations screen,
select Batch Control.
b. Press OK.
2.
To view a current batch, use the Right or
Left arrow keys to select a Meter Run or
Station (at the top of the screen) currently
running a batch.
3.
Use the Up or Down arrow keys to scroll
through the list of details for that batch.