Omni 4000 Series - Page 81

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
4-2
OMNICONNECT® Reports
1.
In the Actions ribbon, click Configure.
2.
a. Expand the Ports tree.
b. Select and expand a Dual Ethernet
card.
c. Select the Ethernet ports to see the
configuration options in the screens to
the right.
3.
Click on the Configure DE button to open
the Ethernet Configuration window.
4.
a. Click on either Printer tab.
b. Fill in the IP address of the selected printer.
c. Fill in other printer-specific information, as needed.
5.
a. Select the Non-scheduled Reports from specific Meter Runs and Stations.
b. Select the Scheduled and Front Panel Historical Reports from specific
Independent Meter Runs and Stations.