Omni Base User Manual

 Do not leave the machine unattended when operating.
 Only carry out the actions expressly included in the functional cycle of the machine.
 Bef
ore starting production, make sure that no people are in the work area.
 Tighten all screws, bolts and lock nuts of every adjustable mechanical element following
normal tightening values, without using any levers or hitting any spanners.
 Never climb onto the machine while operating.
 All plates and pictograms must be kept entirely readable. If the identification plate
deteriorates with use and turns unreadable, even just partly, a new one should be
requested from the Builder, referring to the data contained in this manual or written on
the original plate.
 Do not
clean or lubricate any parts of the machine when operating.
 Do
not clean the machine with water nor aggressive products, even if diluted.
CEC BASE IGM REV13 13

Omni Base Specifications

General

Brand	Omni
Model	Base
Category	Stretch Wrapping Systems
Language	English