Omni Base User Manual

CHAPTER 3
SAFETY DEVICES
3.1 EMERGENCY STOP
The machine is equipped with a RED disconnector on yellow background, located on the control
panel.
Thi
s device only can be reached and operated by the operator during the working cycle, to perform
an emergency stop of the machine. By pressing the button, the machine will be safely stopped in
the shortest possible time.
To restart the machine after an emergency stop, press the RESET button on the control panel.
Before restarting the machine after an emergency stop, make sure that the danger has been
removed.
CEC BASE IGM REV13 25

Omni Base Specifications

General

Wrap Height Max	80"
Film Width	20"
Load Weight Max	4000 lbs
Load Capacity	4000 lb
Turntable Speed	12 RPM
Wrapping Speed	12 RPM