There are no risks of loss of stability, but the machine can be anchored to the floor at the request
of the Client. During designing, the Builder can plan where to locate holes for the fixing to the floor.
Do not intervene on the machine in any way before having consulted the Builder before.
As
for risks of breaking during functioning, it is important to clearly mark off the usage area, to
guarantee that the machine elements and the connection parts can bear the stress they have to be
subject to during usage, as foreseen by the Builder.
The us
ed materials are sufficiently and adequately resistant for the foreseen usage environment
(particularly concerning fatigue, ageing, corrosion and abrasion).
The m
achine elements and their connection parts have been specifically designed to bear the
stress they have to be subject to during usage.
The B
uilder cannot describe any risks of interference with other machines being used in the
workplace of the stretchwrapping machine (e.g. noise, electromagnetic phenomena, etc.), but such
risks are not to be excluded.
THE CL
IENT IS REQUIRED TO CARRY OUT A RISK ASSESSMENT, CONSIDERING THE
MACHINE WORK, THE INSTALLATION PLACE, THE SURROUNDING ENVIRONMENT AND
ANY INTERFERENCES WITH OTHER MACHINES.
CEC BASE IGM REV13 31
To Next Page
Loading...
Need help?
General
