3. Navigate to Save Preset, and provide a name for the settings you just created. This can
serve as a baseline while you do final step #4:
4. Find the absolute best VOLT settings for your programming.
There are quick tips in the Processing chapter of this manual.
Next Step for VOLT: SG:
1. Navigate to Stereo Gen > Save SG Config, and provide a name for the composite
generator setup you just created.
Final Steps for all DSP|Cores:
1. Navigate to In/Out > Save IO Config, and provide a name for the signal routing setup
you just created.
2. Read the rest of this manual.
3. Learn how to shape your sound with the best Omnia processing for your station and mar-
ket. Take the time to experiment, and enjoy the results!
CHAPTER 2
| 10
VOLT IN A HURRY!
To Next Page
Loading...
Need help?
General