Need help?Do you have a question about the Omnifilter OT32 and is the answer not in the manual?
General| Filtration Method | Sediment |
|---|---|
| Contaminants Reduced | Sediment, Rust |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Type | Whole House |
| Filter Media | Pleated |
| Nominal Micron Rating | 50 micron |
| Recommended Service Life | 3 months |
Connects the filter system to the cold water supply line for operation.
Determines the optimal position for the drinking water faucet installation.
Attaches the dedicated drinking water faucet to the sink or countertop.
Secures the main filter system housing unit under the sink.
Connects the 1/4-inch tubing to the drinking water faucet outlet.
Connects the plastic tubing to the water supply adapter inlet.
Assembles tubing between the supply adapter, filter, and faucet.
Turns on the water supply and flushes the system before use.
Details the step-by-step process for replacing filter cartridges in the system.
Provides solutions for leaks occurring at the housing connection points.
Offers guidance for leaks occurring at tubing connection points.
To Next Page
