EasyManua.ls Logo

Omnifilter SFM2 - User Manual

Omnifilter SFM2
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
293 Wright St. • Delavan, WI 53115
Phone: 800.937.6664
www.omnifilter.com
For further operating, installation, maintenance,
parts or assistance:
Call OMNIFILTER Customer Service at:
800.937.6664
Para mayor información sobre la operación,
instalación o el mantenimiento:
Llame al Servicio al Cliente de OMNIFILTER:
800.937.6664
Pour de tout autre renseignement concernant le
fonctionnement, l’installation ou l’entretien :
Appelez le service à la clientèle en
composant le : 800.937.6664
Model SFM2, Series B
Undersink
Drinking Water System
INSTALLATION INSTRUCTIONS
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 2-4
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Modelo SFM2, Serie B
Sistema de agua potable
para debajo del fregadero
INSTRUCCIONES DE INSTALACIÓN
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Páginas 7-10
Piezas de repuesto . . . . . . . . . . . . . . . . . . . . . . . . . . . Página 10
Modèle SFM2, Série B
Système d’eau de
table sous évier
CONSIGNES D’INSTALLATION
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 11-14
Pièces de rechange . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14
Tools and Fittings Required
Pencil
File
Phillips screwdriver
Pipe cutter or hacksaw
Parts Included
Filter housing assembly with built-in
mounting bracket and quick-connect
fittings
O-ring
3/8-inch (10 mm) tubing
GAC1 Series B cartridge
QC Elbows
Filter housing wrench
Mounting screws
Silicone lubricant
Cartridge change reminder
Herramientas y conexiones
necesarias
Lápiz
Lima
Destornillador Phillips
Cortador de tuberías o sierra para
cortar metales
Piezas incluidas
Conjunto de portafiltro con soporte de
montaje incorporado y empalmes de
conexión rápida
Junta en O
3/8-inch (10 mm) tubing
GAC1 Serie B cartouche
Codos de conexión rápida
Llave para la caja
Tornillos de montaje
Lubricante de silicona
Una etiqueta de aviso de cambio
de cartouche
Outils et raccords nécessaires
Crayon de bois
Lime
Tournevis Phillips
Coupe-tube ou scie à métaux
Pièces comprises
Ensemble de boîtier de filtre avec patte de
montage intégrée et raccords rapides
Joint torique
3/8-inch (10 mm) tubo
GAC1 Série B cartucho
Coudes à raccordement rapide
Clé pour boîtier de filtre
Vis de fixation
Lubrifiant silicone
Étiquette de rappel de changement
de cartucho
©2006 OMNIFILTER • Printed in U.S.A.
The SFM2 Series B is Tested and Certified
by NSF International to NSF/ANSI
Standard 42 for the reduction of chlorine
taste and odor.
La serie SFM2 B ha sido probada y
certificada por NSF International bajo la
norma 42 de NSF/ANSI para la reducción
del sabor y olor a cloro
Le SFM2 série B a été testé et certifié par
NSF International selon la norme 42 de
NSF/ANSI pour la réduction des goûts et
des odeurs de chlore

Questions and Answers

  • M
    mcdowellmarieAug 11, 2025
    What to do if Omnifilter SFM2 leak on inlet/outlet connections?
    • C
      corymarquezAug 11, 2025
      If your Omnifilter Water Filtration System is leaking at the inlet/outlet connections, first turn off the water supply and release pressure by turning on the faucet. Remove the tubing, ensure it's cut squarely and free of burrs, then reinsert it into the quick-connect fittings, pushing securely until it hits a hard stop. If the leak continues, contact OMNIFILTER Customer Service at 800.937.6664.
  • A
    Anthony HunterAug 19, 2025
    How to resolve changes in taste, color, or flow of Omnifilter Water Filtration Systems?
    • A
      Amber OwensAug 19, 2025
      If you notice changes in the taste, color, or flow of water from your Omnifilter Water Filtration Systems, replace the cartridge sooner, especially if the water pressure at the faucet noticeably drops.
  • A
    Amanda MorganAug 26, 2025
    What to do if there are leaks between the cap and bottom of housing in Omnifilter SFM2?
    • S
      Sean BaileyAug 26, 2025
      To address leaks between the cap and the bottom of the housing: First, turn off the water supply and press the red pressure-relief button. Remove the bottom of the housing. Then, clean the o-ring and the o-ring groove, which is located directly beneath the threads of the housing. Lubricate the o-ring with silicone grease and securely replace it into the groove. Finally, screw the bottom of the housing back onto the cap and hand-tighten it, being careful not to overtighten.
  • T
    Tammy Webster MDSep 2, 2025
    Why do Omnifilter SFM2 cartridges disintegrate and produce odor?
    • Z
      Zachary SimonSep 2, 2025
      Cartridges containing cellulose may disintegrate, produce a 'sewer' or 'rotten egg' odor, or form a black precipitate because certain types of harmless bacteria attack the cellulose material. Consult OMNIFILTER Customer Service for advice or select a different cartridge.

Omnifilter SFM2 Specifications

General IconGeneral
BrandOmnifilter
ModelSFM2
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals