00053693.DOC, Version 1.0
18/28
3. OPERATING DETERMINATIONS
The DXO-24E is a digital loudspeaker management system designed for professional live and studio
applications together with a PC. For convenient control of the unit via a computer a special PC program is
s
upplied on CD-ROM. The unit features two analog inputs and four analog outputs designed as servo-
balanced XLR connectors.
The controller is only allowed to be operated with a direct current of 6 V, 500 mA and was designed for
indoor use only.
The device must only be operated with the included power unit. The power unit falls under protection-class 2
and the crossover under protection-class 3.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
The ambient temperature must always be between 0° C and +40° C. The relative humidity must not exceed
50 % with an ambient temperature of 40° C. This device must only be operated in an altitude between -20
and 2000 m over NN.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
To Next Page
Loading...
