EasyManua.ls Logo

Omnitronic KVP-101 - Precautions and Troubleshooting; Cleaning and Maintenance

Omnitronic KVP-101
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
00030092.DOC, Version 1.0
25/27
7. PRECAUTIONS
This CD player cannot be compared to conventional Hifi CD players - even if they have almost the same
appearance. This player is much more rugged in order to withstand the strenous road use and consistent
transports of mobile discotheques. We recommend to put the CD player on plastic foam or on rubber feet in
order to avoid skipping, which is caused by vibrations of low frequencies. The same thing holds tDisque if the
CD player is mounted in a rack an the rack is exposed to such frequencies.
Should you have further problems, please refer to the chart below.
Have the connections correctly been carried out?
Is your amplifier and your mixer properly adjusted?
Have you kept to all instructions given in this manual?
SYMPTOMS POSSIBLE CAUSES SOLUTION
Device does not react when swit-
ching on.
Connection to mains disrupted. Check AC plug and AC
connection.
Player does not start operation CD is badly positioned or dirty Reposition CD with label atop or
clean with a dry and soft cloth.
No sound Check the mixer and amplifier
connections
Possibly exchange connections.
Does not read properly. The device is exposed to
vibrations.
Place the device on a more stable
stand, rack etc.
Pop noise Mixer or amplifier connections
inapropriate
Check cable and jack quality
No picture Wrong connection.
TV defective or not correctly
adjusted.
Possibly exchange connections.
Check tv on malfunction or re-
adjust.
8. CLEANING AND MAINTENANCE
Disconnectfrommainsbeforestartingmaintenanceoperation!
DANGERTOLIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

Related product manuals