00008423.DOC VERSION 3.3
33/49
TECHNICAL SPECIFICATIONS P-3500
Power supply: 115/230 V AC, 50/60 Hz ~
Power-range: 230 V ± 10 % (206 V - 253 V)
Power consumption (max.): 4500 W
Power output sine:
Stereo 4 Ohm 2 x 1620 W
Stereo 8 Ohm 2 x 1040 W
8 Ohms bridged 1 x 3300 W
Frequency range: 10 - 50 000 Hz, ± 1.5 dB
Damping-factor: > 150
Distortion factor: 0.01 %
Signal to Noise Ratio: 90 dB
Channel seperation (at 1
KHz):
70 dB
Min. input sensitivity: 0.77 V/26 dB/1.4 V
Input impedance: 20 kOhms (balanced)
Slew-rate: 60 V/µsec
Input-connectors: 2 x XLR-female-plug, 2 x 1/4"-jack-plug
Output-connectors: 2 x Speaker (stereo), 1 x Speaker (bridge), 2 x Banana/screw
combination
Control elements: Power switch, input attenuators (one per channel), Mode switch -
Stereo/Parallel/Bridged, Ground Lift, Input-Level-Select (0.77 V/26
dB/1.44 V), limiter
LED indicators (per
channel):
Power, Protect, Signal, Mode
Protection circuits: Short-circuit, DC-protection-circuit, Thermal protection-circuit, Softstart
Construction: Steel chassis, aluminium frontpanel
Dimensions: 440 x 482 x 100 mm
Weight: 24 kg
Please note: Every information is subject to change without prior notice. 02.08.2006 ©
To Next Page
Loading...
Need help?
General
