What to do if Omron 3 Series Blood Pressure Monitor detects irregular heartbeats?
If your Omron Blood Pressure Monitor detects irregular heartbeats, remove the arm cuff. Wait 2 to 3 minutes before taking another measurement, repeating the steps outlined in section 3.3. If the error persists, it is advisable to contact your physician.
How to fix arm cuff applied too loosely on Omron 3 Series Blood Pressure Monitor?
Apply the arm cuff tighter. Refer to section 3.1.
How to fix air plug disconnected on Omron 3 Series?
Insert the plug securely. Refer to section 3.1.
What to do if air is leaking from the arm cuff on my Omron 3 Series?
Replace the arm cuff with a new one. Refer to section 5.5.
Why does my Omron Blood Pressure Monitor show measurement values too high or too low?
Blood pressure varies constantly. Many factors including stress, time of day, and how you wrap the cuff, may affect your blood pressure. Please, review sections 1.2 and 3.3.
What to do if the Omron 3 Series batteries are exhausted?
You should replace the batteries with new ones at once. Refer to section 2.1.
What to do if the Omron 3 Series batteries are low?
You should replace the batteries with new ones ahead of time. Refer to section 2.1.
What to do if the Omron 3 Series Blood Pressure Monitor displays 'E2' and the arm cuff has not been inflated sufficiently?
Repeat the measurement, remaining still and not talking. If 'E2' appears repeatedly, inflate the arm cuff manually until it is 30 to 40 mmHg above your previous measurement result. Refer to section 3.3.
What to do if I move during measurement with Omron 3 Series Blood Pressure Monitor?
Carefully read and repeat the steps in section 3.3.
What to do if the Omron Blood Pressure Monitor detects irregular heartbeats?
Remove the arm cuff, wait 2 - 3 minutes, and then take another measurement, repeating the steps in section 3.3. If this error continues, contact your physician.
General| Memory Storage | 14 Readings |
|---|---|
| Irregular Heartbeat Detection | Yes |
| Type | Upper Arm |
| Display | LCD |
| Pressure Range | 0 to 299 mmHg |
| Pulse Rate Range | 40 to 180 beats per minute |
Provides essential safety information for proper monitor usage.
Defines the device's purpose, target user, and circumference range.
Highlights potential hazards leading to severe injury or death.
Identifies situations that may cause minor injury or equipment damage.
Reiteration of consulting a physician for diagnosis and treatment.
Step-by-step guide for correctly inserting batteries into the monitor.
Detailed procedure for correctly positioning and applying the wrist cuff.
Comprehensive steps to perform a blood pressure and pulse measurement.
Lists common error displays, their causes, and recommended solutions.
To Next Page
