Omron 3G3M1-A4007-ECT - Page 180

Parameter
No.
Function name Monitor or data range
Default
data
Setting
during
RUN
Unit
M34 Torque Current Monitor on Alarm
-327.68 to 327.67
0 - %
M35
Output Frequency Monitor on
Alarm
0.00 to 655.35 Hz
0 - Hz
M36 Input Power Monitor on Alarm
0.00 to 399.99
0 - %
M37
Output Current Effective Value
Monitor on Alarm
0.00 to 399.99 %
0 - %
M38
Output Voltage Effective Value
Monitor on Alarm
0.0 to 1000.0 V
0 - V
M39
Operation Command Monitor on
Alarm
Bit 0: FWD
Bit 1: REV
Bit 2: DI1
Bit 3: DI2
Bit 4: DI3
Bit 5: DI4
Bit 6: DI5
Bit 7: ---
Bit 8: ---
Bit 9: ---
Bit 10: ---
Bit 11: EN
Bit 12: ---
Bit 13: DI6
Bit 14: DI7
Bit 15: RST
0 -
-
4 Parameter List
4-14
M1 Series Standard Type User's Manual (I669)