Omron 5 Series - User Manual

Questions and Answers

M
Mr. Keith Foster IIISep 8, 2025
What to do if appears or measurement fails on Omron Blood Pressure Monitor?
- M
  Monica GriffinSep 8, 2025
  If your Omron Blood Pressure Monitor displays or a measurement cannot be completed after the arm cuff inflates, it's likely because you moved or talked during the measurement, or the arm cuff didn't inflate enough. Stay still and quiet during measurements. If “E2” appears repeatedly, manually inflate the cuff until the systolic pressure is 30 to 40 mmHg above your previous reading. This issue might also occur if your systolic pressure is above 210 mmHg; in this case, also inflate the cuff manually to the same pressure range.
C
Christopher JohnsonSep 10, 2025
Why is the display blank on my Omron 5 Series Blood Pressure Monitor?
- H
  harmoncarlSep 10, 2025
  If the display of your Omron Blood Pressure Monitor is blank, it's possible the batteries are not correctly installed. Check the battery compartment and ensure the polarities (+ and -) are aligned properly as indicated. Then try turning on the monitor again.
S
Sarah SimmonsSep 12, 2025
Why does my Omron Blood Pressure Monitor display or turn off during measurement?
- J
  Jay FloresSep 12, 2025
  If your Omron Blood Pressure Monitor displays or turns off unexpectedly during a measurement, it means the batteries are likely depleted. Replace all four batteries immediately with new ones to resolve this issue.
D
deanjohnSep 14, 2025
What does 'Er' mean on my Omron 5 Series Blood Pressure Monitor?
- J
  Joseph ClarkSep 14, 2025
  If the Omron Blood Pressure Monitor displays “Er”, it suggests the monitor has malfunctioned. Try pressing the [START/STOP] button again to reset it. If “Er” continues to appear, it indicates a more serious issue.
M
marquezmarioSep 15, 2025
Why is the battery symbol flashing on my Omron 5 Series Blood Pressure Monitor?
- M
  Mr. Thomas WeissSep 15, 2025
  If the battery symbol is flashing on your Omron Blood Pressure Monitor, it indicates that the batteries are low. It's recommended to replace all four batteries with new ones.
A
Ann CampbellSep 18, 2025
What to do for any other problem with Omron Blood Pressure Monitor?
- D
  Devon MitchellSep 18, 2025
  To address other problems with your Omron Blood Pressure Monitor, first turn the monitor off by pressing the [START/STOP] button, then press it again to restart and attempt a new measurement. If the issue persists, remove all batteries, wait 30 seconds, and then reinstall them.

Omron 5 Series Specifications

General

Model	BP7200
Type	Upper Arm
Memory Storage	60 readings
Display	Digital LCD
Irregular Heartbeat Detection	Yes
Measurement Method	Oscillometric
Measurement Range (Pressure)	0 to 299 mmHg
Body Movement Detection	Yes
Power Source	4 AA batteries
Measurement Range (Pulse Rate)	40 to 180 beats/min.
Average Reading	Yes
Fits Arm Circumference	22-42 cm
Users	2 users