Omron AUTOMATIC DIGITAL HEM-739 - Page 18

17
HOW TO TAKE A READING
Special instructions regarding the ination of the
IntelliSense
TM
Monitor:
1. In rare circumstances the user’s
physiological characteristics may
require a higher level of ination.
These circumstances may include
eak pulse or an unusually high
systolic blood pressure.When this
occurs, the monitor may reinate to
a value of about 30 mm Hg higher
than the previous ination value.
Reination occurs only once.
2. If your systolic pressure is known to
be more than 220 mmHg, push and
hold the START button until the
monitor inates 30 to 40 mmHg
higher than your suspected systolic
pressure.
NOTE: Do not apply more
pressure than necessary.
3. If you want to stop the measurement,
push the ON/OFF button.The monitor
will stop inating and start deating
apidly, then the monitor will turn off.
Continue to press button
START