18
PREPARING FOR USE
STEP 3 PAIRING THE DEVICE TO YOUR SMARTPHONE
1. Turn on the device, following the app instructions.
2. Confirm the device is paired successfully.
When the device is successfully paired to the smartphone, there will
be a steady green indicator light on the device.
Which One Is Device A?
The device that is connected first will be referred to as device “A” on the
app. The second device that is connected will be referred to as device “B”.
STEP 4 ATTACHING THE DEVICE ONTO THE PAD
For first time use, remove the pad from the sealed plastic bag and attach
the device. Do not remove the plastic film at this time.
1. Attach the connector to the connection
hole and push the device until it clicks
into place.
Connection holes
Connector
To Next Page
Loading...
Need help?
General
