1. Plug the arm cuff into your monitor by
inserting the air plug into the air jack
securely until it clicks.
Click
2. Apply the arm cuff to your left upper arm.
• The bottom edge of the arm cuff
should be 0.5 inch (1 to 2 cm)
above the inside elbow. The air
tube is on the inside of your arm
and aligned with your middle
finger.
Bottom edge
0.5 inch (1 to 2 cm)
3. Make sure that the air tube is positioned on the
inside of your arm and wrap the cuff securely,
so it cannot move around your arm.
To take a measurement on your right arm
When you take a measurement on your right arm, the air tube should run along the
side of your elbow, along the bottom of your arm. Be careful not to rest your arm on
the air tube.
17
To Next Page
