Omron BP7250 User Manual

22
2.4 Applying the Arm Cuff
Note
• The following steps are for applying the arm cuff to your left arm. When
you take a measurement on your right arm, follow the cuff wrap
instructions for a right arm use mentioned under “To take a measurement
on your right arm” located at the end of this sub-section.
• The blood pressure can differ between the right arm and the left arm, and
the measured blood pressure readings can be different. OMRON
recommends to always use the same arm for measurement. If the
readings between both arms differ substantially, check with your
physician to determine as to which arm to use for your measurements.
Caution
• Remove tight-fitting or thick clothing from your arm while taking a
measurement.
1. Plug the arm cuff into your monitor
by inserting the air plug into the air
jack securely until it clicks.
2. Place your hand through the cuff loop. Pull
the cuff until it reaches your upper left arm.
Click

Omron BP7250 Specifications

General

Model Number	BP7250
Type	Upper Arm Blood Pressure Monitor
Bluetooth Connectivity	Yes
Irregular Heartbeat Detection	Yes
User Profiles	2
Measurement Method	Oscillometric
Power Source	4 AA batteries or AC adapter
Average Reading	Averages 3 readings taken within 10 minutes
Cuff Size	9 to 17 inches
Weight	Approx. 400g (without batteries)
Warranty	5-Year Limited Warranty