Omron BP7250 User Manual

27
 Using the Guest Mode
The guest mode can be used to take a single measurement for another
user.
Note
• No readings are stored in the memory.
1. Press and hold the [START/STOP] button for
more than 2 seconds.
The date/time display will disappear.
2. Release the [START/STOP] button when the date/time display
turns off.
The arm cuff automatically starts to inflate.
 If your systolic pressure is more than 210 mmHg
If your systolic pressure is more than 210 mmHg, take a measurement
manually.
After the arm cuff starts to inflate, press and hold the [START/STOP]
button until the monitor inflates 30 to 40 mmHg higher than your expected
systolic pressure.
Note
• Do not inflate above 299 mmHg.
Caution
• Inflating to a higher pressure than necessary may result in bruising of the
arm where the cuff is applied.

Omron BP7250 Specifications

General

Model Number	BP7250
Type	Upper Arm Blood Pressure Monitor
Bluetooth Connectivity	Yes
Irregular Heartbeat Detection	Yes
User Profiles	2
Measurement Method	Oscillometric
Power Source	4 AA batteries or AC adapter
Average Reading	Averages 3 readings taken within 10 minutes
Cuff Size	9 to 17 inches
Weight	Approx. 400g (without batteries)
Warranty	5-Year Limited Warranty