Omron BP7250CAN - Taking a Measurement with Smart Device

29
5. Confirm that your monitor is connected successfully.
When your monitor is connected
successfully to your smart device, the OK
symbol appears.
6. Press the [START/STOP] button to turn your monitor off.
Note
•If the “Err” symbol appears, follow the instructions in
the app.
•Your monitor automatically turns off after 2 minutes.
•Be aware that OMRON will not be responsible for the
loss of data and/or information in the app.
•Only compatible OMRON apps should be used with
this monitor to help ensure correct data transfer.
4.2 Taking a Measurement
Refer to sub-section 3.1 to start a measurement. Open the app on your
smart device and follow the instructions.
Note
•Make sure that your monitor is within 16 ft. (5 m) of your smart device.
 Transferring Data Automatically/Manually
•When Bluetooth is enabled, the readings will be transferred to your smart
device within 1 hour after taking a measurement.
•To transfer the readings manually, press the button.