34
6.2 Restoring Your Monitor to the Default Settings
To delete all the information stored in your monitor, follow the instructions
below. Make sure that your monitor is turned off.
1. While holding the
button down, press
and hold the [START/
STOP] button for more
than 3 seconds.
The display to the right
flashes.
2. While holding the
button down again,
press and hold the
[START/STOP] button for
more than 3 seconds.
The display stops flashing,
then your monitor is restored
to the default settings.
3. Press the [START/STOP] button to turn your monitor off.
•After the completion, the year flashes on the display. Refer to sub-
section 2.2 to set the date and time manually, or refer to sub-
section 4.1 to pair your monitor to set the date and time
automatically.
•Reverting to the default setting of your monitor does not delete the
information in the app.
To Next Page
Loading...
Need help?
General
