24
4. Using Your Monitor with a Smart Device
4. Press and hold the button for more
than 2 seconds.
The connection symbol “ ” and “P” flashes on the
display of the monitor.
5. Follow the pairing instructions shown on
your smart device, while the connection
symbol is flashing on the display of the
monitor.
6.
Confirm if the monitor is connected
successfully.
When the monitor is connected successfully to your smart
device, the OK symbol “ ” flashes.
If “Err” appears, refer to “Connection failure. / Data is not
being transmitted.” in section 7.2 for more detail.
The monitor automatically turns off without any operations.
To Next Page
Loading...
