19
3. Using the Device
EN
3. Press the or button to view the values stored in the
memory.
: To view the older values
: To view the more recent values
Note: The value with the TruRead
TM
symbol is the average for the consecutive 3 measurements. To
display the individual measurement values, press
the button
while the average is displayed.
To View the Average Value
1. Select your USER ID (1 or 2).
2. Press and hold the button for more
than 3 seconds.
Notes:
• If the previous measurement was taken without setting the date and time,
the average value is not calculated.
• If there are no measurement values stored in the memory, the screen to
the right is displayed.
HEM-7321-Z_C_M.book Page 19 Monday, June 16, 2014 12:09 PM
To Next Page
Loading...
Need help?
General
