Omron CJ1M-CPU series Replacement Guide

5
2. System Configurations
2.1 CJ1M/CJ1G/CJ2M system comfiguration comparison
Same Power Supply Unit, Special I/O Units, and Basic I/O Unit can be used for CJ1M/CJ1G Series and
CJ2M Series.
♦Built-in I/O
CJ1M
CJ1Ｇ
CJ2M
Built-in I/O function
Built-in I/O function
not supported
CPU funcitons will be available by adding the
CJ2M-MD211/CJ2M-MD212
Up to two units can be mounted.
*It is possible to use the unit with the CPU Unit of unit version
2.0 or later
In:10 points/Out:6
points
Supported by CPU2*
only
-
In:10 points/Out:6 points (when one unit is used)
In:20 points/Out:12 points (when two units are used)

Omron CJ1M-CPU series Specifications

General

Brand	Omron
Model	CJ1M-CPU series
Category	Controller
Language	English