9
Program
●Next process and error process settings
The following describes the setting contents of the next process and error process for the
step. The process set in the Next Column is executed when the step execution ends
normally. If a communications error occurs, the process set in the Error Column is executed.
< Screenshot of step settings >
<Setting>
Step No. Next process Error process
00 Matrix Abort
<Process list>
End Ends the communications sequence.
Next Goes to the next step number.
Abort Interrupts the step and ends the communications sequence.
Goto Goes to a designated step number.
Matrix Uses the settings of the receive matrix.
To Next Page
Loading...
