Omron CK M-CPU1 1 Series Startup Guide

14
Initial Settings of the Controller
Configure the initial settings for the Controller.
Precautions for Correct Use
Configuring the initial settings clears all data in the Controller memory. Back up necessary
data in advance.
1
In the Terminal tab page, type
the $$$*** command to reset the
Controller to factory default.
2
Select System – CPU –
System in the Solution Explorer.
3
SelectClock Settings.

Omron CK M-CPU1 1 Series Specifications

General

Brand	Omron
Model	CK M-CPU1 1 Series
Category	Controller
Language	English