Omron CK M-CPU1 1 Series Startup Guide

15
4
Specify Servo Frequency.
Select the Servo Frequency
setting from 4 kHz, 2 kHz, or
1 kHz.
5
Click the Accept button.
6
If you have changed the servo
frequency setting, type the save
command in the Terminal tab
page of Power PMAC IDE.
When complete, the “Save
Complete” message appears in
the Terminal tab page.
7
Click Delta Tau – Communication
Setup on the toolbar to display the
Communication Setup dialog box.

Omron CK M-CPU1 1 Series Specifications

General

Brand	Omron
Model	CK M-CPU1 1 Series
Category	Controller
Language	English