Omron CK M-CPU1 1 Series Startup Guide

16
8
In the Device Properties dialog box,
click the No Device button.
This operation sets the Controller to
the offline state.
9
Restart the Controller.
The servo frequency that has been
set is reflected.
10
Wait until the startup process of the
Controller is complete. Then click
Delta Tau – Communication Setup
on the toolbar to display the Device
Properties dialog box.
In the Communication Setup dialog
box, click the Connect button.
This operation sets the Controller to
the online state.

Omron CK M-CPU1 1 Series Specifications

General

Brand	Omron
Model	CK M-CPU1 1 Series
Category	Controller
Language	English