Need help?Do you have a question about the Omron CP1E-ED and is the answer not in the manual?
General| Model | CP1E-ED |
|---|---|
| Manufacturer | Omron |
| Operating Temperature | 0 to 55 °C |
| Type | Programmable Logic Controller (PLC) |
| Power Supply | 100 to 240 VAC or 24 VDC |
| Output Type | Relay |
| Pulse Output | 1 channel (20kHz) |
| Expansion Modules | Yes |
| Humidity | 10 to 90% |
| Vibration Resistance | 10 to 57 Hz |
| Shock Resistance | 147 m/s² X, Y, and Z directions 3 times each |
| Dimensions | 90 x 90 x |
| Communication Ports | 1 port (RS-232C) |
Explains the notation used for safety warnings, cautions, and important information.
Safety guidelines related to power supply connection and handling.
Safety guidelines to follow during the physical installation of the unit.
Safety guidelines to follow during the electrical wiring process.
Describes the CX-Programmer software for PLC programming and debugging.
Details essential fail-safe circuits to be set up outside the CP1E.
Describes the methods for wiring the CP1E CPU Unit and its components.
Provides steps and information for troubleshooting CPU Unit errors.
Guides users through troubleshooting errors in units other than the CPU Unit.
To Next Page
