To Next PageTo Next Page
Need help?Do you have a question about the Omron CP1E - INTRODUCTION and is the answer not in the manual?
General| Series | CP1E |
|---|---|
| Manufacturer | Omron |
| Input Voltage | 100 to 240 VAC or 24 VDC (depending on model) |
| I/O Points | 10 to 60 points |
| Number of Inputs | 6 to 36 points |
| Number of Outputs | 4 to 24 points |
| Communication Ports | USB, RS-232C |
| Programming Language | Ladder Diagram (LD) |
| Power Supply | 100-240V AC or 24V DC |
| Storage Temperature | -25°C to 65°C |
| Vibration Resistance | 10 to 57 Hz, 0.075mm amplitude |
| Shock Resistance | 147 m/s², 3 times each in X, Y, Z directions |
| Weight | Varies by model |
| Type | Programmable Logic Controller (PLC) |
Details essential precautions, intended audience, safety measures, and application guidelines for safe operation.
Explains how to construct ladder programs for the shutter control system example.
Covers starting and navigating the CX-Programmer software interface for program development.
Step-by-step guide to entering ladder logic elements and modifying comments and rungs.
Describes establishing a connection between the computer and CP1L for program transfer and monitoring.
Step-by-step process for transferring programs from CX-Programmer to CP1L and executing them.
Covers monitoring, force-setting, searching, and online editing for efficient debugging.
