CP1L/CP1E Overview
1
1
CP1L/CP1E Overview
14 SYSMAC CP1L/CP1E Introduction Manual
1-1 CP1L/CP1E Models
CP1L programmable controller is a PLC package type, available with 10, 14, 20, 30, 40 or 60 I/O points.
The CP1E includes E-type CPU Units (basic models) for standard control operations using basic,
movement, arithmetic, and comparison instructions, and N-type CPU Units (application models) that
supports connections to Programmable Terminals, Inverters, and Servo Drives. Each unit is available
with 20,30 or 40 I/O points.
For application examples that use CP1L or CP1E, refer to appendix A-4 CP1L/CP1E Programming
Examples.
1-1-1 CP1L Models
■10-point I/O Units (CP1L-L10D-)
• CPU unit has 6 input points and 4 output points.
• CP-series expansion I/O units cannot be used to add I/O points.
■20-point I/O Units (CP1L-L20D-)
• CPU unit has 12 input points and 8 output points.
• CP-series expansion I/O units can be used to add I/O points, up to a total of
60 I/O points.
To Next Page
Loading...
