Omron CPM2A - 11-2005 - User Manual

OPERATION MANUAL
Programmable Controllers
SYSMAC
CPM2A
Cat. No. W352-E1-07

Omron CPM2A - 11-2005 Specifications

General

Category	Controller
Manufacturer	Omron
Output Type	Relay
Input Voltage	24 VDC
Supply Voltage	100 to 240 VAC
Timer/Counter	256
Communication Port	RS-232
Operating Temperature	0 to 55°C
Humidity	10% to 90% RH (with no condensation)
Program Capacity	2048 Steps

Summary

SECTION 1 Introduction

CPM2 A Features and Functions

Describes the features and functions of the CPM2A PCs, covering basic and advanced capabilities.

Preparation for Operation

SECTION 2 Unit Specifications and Components

Specifications

Presents detailed technical specifications for CPM2A CPU Units and expansion units.

SECTION 3 Installation and Wiring

Design Precautions

Installing the CPM2 A

Provides step-by-step instructions for physically installing the CPM2A CPU Unit and expansion units.

Wiring and Connections

Details the procedures for correctly wiring power supplies, I/O devices, and communication devices.

SECTION 4 Using a Programming Console

Programming Console Operations

Explains various operations and functions available when using a programming console with the CPM2A.

Programming Example

SECTION 5 Test Runs and Error Processing

Initial System Checks and Test Run Procedure

Outlines the procedures for initial system checks and performing test runs of the CPM2A.

Self-diagnostic Functions

Troubleshooting Flowcharts

Provides flowcharts to help diagnose and resolve operational errors and issues.