ix
About this Manual:
The CPM2A is a compact, high-speed Programmable Controller (PC) designed for control operations in
systems requiring from 10 to 120 I/O points per PC. There are two manuals describing the setup and
operation of the CPM2A: The CPM2A Operation Manual (this manual) and the CPM1/CPM1A/CPM2A/
CPM2C/SRM1(-V2) Programming Manual (W353). (The CPM1/CPM1A/CPM2A/CPM2C/SRM1(-V2)
Programming Manual is referred to as simply the Programming Manual in this manual.)
This manual describes the system configuration and installation of the CPM2A and provides a basic
explanation of operating procedures for the Programming Consoles. It also introduces the capabilities of
CX-Programmer, the SYSMAC Support Software (SSS) and SYSMAC-CPT Support Software. Read this
manual first to acquaint yourself with the CPM2A.
The Programming Manual (W353) provides detailed descriptions of the CPM2A’s programming functions
and application methods for Expansion Units. The SYSMAC Support Software Operation Manuals:
Basics and C-series PCs (W247 and W248) provide descriptions of SSS operations for the CPM2A and
other SYSMAC C-series PCs. The WS02-CXPjj-E CX-Programmer Operation Manual (W414) pro-
vides details of operations for the WS02-CXPjj-E CX-Programmer. The SYSMAC-CPT Support Soft-
ware Quick Start Guide (W332) and User Manual (W333) provide descriptions of ladder diagram opera-
tions in the Windows environment.
Please read this manual carefully and be sure you understand the information provided before attempting
to install and operate the CPM2A.
Section 1 gives a brief overview of the steps involved in developing of a CPM2A System, describes the
possible system configurations, and describes the CPM2A’s special features and functions.
Section 2 provides the technical specifications of the Units that go together to create a CPM2A PC and
describes the main components of the Units.
Section 3 describes how to install and wire a CPM2A PC.
Section 4 describes how to connect the Programming Console, and how to perform the various program-
ming operations.
Section 5 describes how to perform a test run and how to diagnose and correct the hardware and soft-
ware errors that can occur during PC operation.
Section 6 describes how to use the CPM1-EMU01-V1 Expansion Memory Unit. Follow the handling pre-
cautions and procedures to properly use the Unit.
Appendix A provides tables of CPM2A Units and related products.
Appendix B provides the dimensions of CPM2A Units.
WARNING Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
!
To Next Page
Loading...
Need help?
General
