Omron CS1G-CPU42H Replacement Guide From C200H To Cs

25
■ I/O Unit
(1) The CS Series has two I/O Units: CS1W-MD261 and CS1W-MD561. The word allocation of the CS-series
Unit is different from that of the C200H-series Unit since the number of inputs and outputs of the CS-series
unit is 32 points each.
(2) C200H-series Units can be used with CS1-series CPU Units.
(3) Refer to the related manuals for details. Although CS-series Units have basic functions of C200H-series Units,
some specifications may differ.
< DC Input/Transistor Output Units >
C200H-series Unit
Corresponding CS-series Unit
Description
Difference
C200H-MD115
No replacement model
I/O Unit with connector for 16 inputs and 16 outputs. The CS Series does not
have the same type of Unit.
Use this Unit with CS1 or use CS1W-MD261 or CS1W-MD561 instead.
12 VDC/16 inputs,
12 VDC/16 outputs (Sinking),
Connector (Special I/O)
C200H-MD215
No replacement model
I/O Unit with connector for 16 inputs and 16 outputs. The CS Series does not
have the same type of Unit.
Use this Unit with CS1 or use CS1W-MD261 or CS1W-MD561 instead.
24 VDC/16 inputs,
5 to 24 VDC/16 outputs
(Sinking), Connector
(Special I/O)
< TTL I/O Unit >
C200H-series Unit
Corresponding CS-series Unit
Description
Difference
C200H-MD501
No replacement model
I/O Unit with connector for 16 inputs and 16 outputs. The CS Series does not
have the same type of Unit.
Use this Unit with CS1 or use CS1W-MD261 or CS1W-MD561 instead.
5 VDC/16 inputs,
5 VDC/16 outputs, Connector
(Special I/O)

Omron CS1G-CPU42H Specifications

General

Brand	Omron
Model	CS1G-CPU42H
Category	Controller
Language	English