Omron E2A - Page 4

4 Inductive Sensors
Connectivity
The E2A sensors are available with the following connectors and cable materials:
Pre-wired models
Standard cable lengths are 2m and 5m.
For other cable lengths please contact your OMRON
representative.
Standard cable material: PVC (dia 4mm) -WP
Other available cable materials and sizes:
- PVC (dia 6mm) -WS
- PUR/PVC – PUR jacket (dia 4mm) -WA
- PUR/PVC – PUR jacket (dia 6mm) -WB
- PVC robotic cable (dia 4mm) -WR
Pre-wired models with cable end connectors
All pre-wired models can be fitted with cable and connectors.
Standard cable end connectors:
- M12 M1J
- M8 (4 pin) M3J
- M8 (3 pin) M5J
Other cable end connectors are available on request.
Connector models
Standard connectors: M12, M8 (4 or 3 pin) -M1, -M3, -M5