Omron E2E User Manual

1E2E
Oil resistant Cylindrical Proximity Sensor (Automotive)
E2E
Designed and tested for
Automotive assembly lines
• tested oil resistance on commonly used lubricants in
Automotive industry
Ordering Information
DC 2-wire/Pre-wired Models - enhanced oil resistant PUR/PE cable
DC 2-wire/Pigtail-connector - enhanced oil resistant PUR/PE cable
DC 2-wire/Pre-wired Models - PVC cable
*1. In addition to the above models, E2E-X@@15 models (e.g., E2E-X3D15-N), which are different in frequency from the above models, are available.
*2. E2E models with a robotics cable are available as well. The model number of a model with a robotics cable has the suffix “-R”
(e.g., E2E-X3D1-R).
*3. Cables with a length of 5 m are also available. Specify the cable length at the end of the model number (e.g., E2E-X3D1-N 5M).
Self-diagnostic
output function
Size Sensing distance Model
NO NC
No Shielded M8 2 mm E2E-X2D1-U E2E-X2D2-U
M12 3 mm E2E-X3D1-U E2E-X3D2-U
M18 7 mm E2E-X7D1-U E2E-X7D2-U
M30 10 mm E2E-X10D1-U E2E-X10D2-U
Self-diagnostic
output function
Size Sensing distance Model
NO NC
No Shielded M8 2 mm E2E-X2D1-M1TGJ-U 0.3 M E2E-X2D2-M1TGJ-U 0.3 M
M12 3 mm E2E-X3D1-M1TGJ-U 0.3 M E2E-X3D2-M1TGJ-U 0.3 M
M18 7 mm E2E-X7D1-M1TGJ-U 0.3 M E2E-X7D2-M1TGJ-U 0.3 M
M30 10 mm E2E-X10D1-M1TGJ-U 0.3 M E2E-X10D2-M1TGJ-U 0.3 M
Self-diagnostic
output function
Size Sensing distance Model
NO NC
Yes Shielded M12 3 mm E2E-X3D1S (See note 1.) ---
M18 7 mm E2E-X7D1S (See note 1.) ---
M30 10 mm E2E-X10D1S (See note 1.) ---
Unshielded M12 8 mm E2E-X8MD1S (See note 1.) ---
M18 14 mm E2E-X14MD1S (See note 1.) ---
M30 20 mm E2E-X20MD1S (See note 1.) ---
No Shielded M8 2 mm E2E-X2D1-N (See notes 2 and 3.) E2E-X2D2-N (See note 3.)
M12 3 mm E2E-X3D1-N (See notes 1, 2 and 3.) E2E-X3D2-N (See note 3.)
M18 7 mm E2E-X7D1-N (See notes 1, 2 and 3.) E2E-X7D2-N (See note 3.)
M30 10 mm E2E-X10D1-N (See notes 1, 2 and 3.) E2E-X10D2-N
Unshielded M8 4 mm E2E-X4MD1 (See notes 2 and 3.) E2E-X4MD2
M12 8 mm E2E-X8MD1 (See notes 1, 2 and 3.) E2E-X8MD2
M18 14 mm E2E-X14MD1 (See notes 1, 2 and 3.) E2E-X14MD2
M30 20 mm E2E-X20MD1 (See notes 1, 2 and 3. E2E-X20MD2

Omron E2E Specifications

General

Type	Inductive Proximity Sensor
Output Type	NPN or PNP
Connection Method	Connector
Operating Voltage	10-30V DC
Hysteresis	10% max of sensing distance
Housing Material	Stainless Steel
Protection Circuits	Reverse polarity protection, Short-circuit protection
Protection Structure	IP67
Operating Temperature	-25°C to +70°C
Current Consumption	10mA max

Summary

OMRON E2E Sensor Ordering Information

DC 2-wire Enhanced Oil Resistant PUR/PE Cable Models

Details ordering for DC 2-wire models with enhanced oil-resistant PUR/PE cable.

DC 2-wire Pigtail-connector Models

Ordering information for DC 2-wire pigtail-connector models with PUR/PE cable.

DC 2-wire PVC Cable Models

Ordering guide for DC 2-wire models featuring PVC cable construction.

DC 2-wire Connector Models

DC 2-wire Pre-wired Connector Models

Ordering and specifications for DC 2-wire pre-wired connector sensor models.

DC 2-wire Connector Pin Assignments

Explains pin configurations for DC 2-wire sensor connector models.

DC 3-wire Pre-wired Models

AC 2-wire Pre-wired Models

DC 3-wire Connector Models

AC/DC 2-wire Pre-wired Models

AC 2-wire Connector Models

E2E Sensor Specifications and Characteristics

E2E-XD DC 2-wire Model Specifications

Detailed technical specifications and characteristics for E2E-XD DC 2-wire sensor models.

E2E-XE/F DC 3-wire Model Specifications

E2E-XY AC 2-wire Model Specifications

AC/DC 2-wire Model Specifications

E2E Sensor Engineering Data

Operating Range Characteristics

Typical operating range graphs for various E2E sensor models.

Leakage Current Characteristics

Typical leakage current versus supply voltage graphs for E2E sensors.

E2E Sensor Residual Output Voltage

E2E Sensor Sensing Distance vs. Object

E2E Sensor Output Circuits and Timing Charts

E2E Sensor Output Circuit Diagrams

Diagrams illustrating output circuit configurations for E2E sensor types.

E2E Sensor Timing Charts

DC 2-wire and AC/DC 2-wire Timing Charts

Timing charts for DC 2-wire and AC/DC 2-wire E2E sensor models.

DC 3-wire and AC 2-wire Timing Charts

Timing charts for DC 3-wire and AC 2-wire E2E sensor models.

E2E Sensor Installation and Connection

E2E Sensor Pin Arrangement

DC 2-wire Model Pin Arrangements

Pinout diagrams for various DC 2-wire E2E sensor models.

DC 3-wire Model Pin Arrangements

DC 3-wire and AC 2-wire Model Pin Arrangements

E2E Sensor Mounting and Precautions

Mounting Procedures and Torque

Instructions for mounting sensors and recommended tightening torques.

Surrounding Metal Clearance and Model Relationships

Guidelines for metal clearance and a summary of model sizes.

E2E Sensor Mutual Interference

E2E Sensor Safety Precautions

E2E Sensor Correct Use Precautions

Installation and Power Supply Precautions

Precautions for sensor installation and power supply connection.

Sensing Object and Wiring Precautions

Guidance on sensing objects and proper wiring practices.

Load Connection and Leakage Current Precautions

Advice on connecting loads and managing leakage current.

E2E Sensor PLC Connection Guidelines

AC/DC 2-wire Sensor Operation Precautions

E2E Sensor Dimensions

E2E Pre-wired Models Dimensions (Shielded)

E2E Pre-wired Models Dimensions (Unshielded)

E2E M12 Connector Models Dimensions

E2E M8 Connector Models Dimensions

E2E Pre-wired M12 Connector Models Dimensions

E2E Pre-wired M12 Connector Models Dimensions

E2E Sensor Mounting Holes Dimensions

Dimensions for the mounting holes of E2E sensors.

E2E Product Warranties and Liability Limitations

OMRON Product Warranty Terms

Details OMRON's warranty and limitations of liability for E2E products.

Application Suitability and Safety Considerations

Guidance on product suitability for applications and safety rating.

Product Specification Changes and Disclaimers

Information on specification changes and general disclaimers.