Omron E3C-LD11 User Manual

E3NC
13
Nomenclature
Compact Laser Sensors
E3NC-LA21/LA51/LA0 E3NC-LA7/LA9/LA24/LA54
Ultra-compact CMOS Laser Sensors
E3NC-SA21/SA51/SA0 E3NC-SA7/SA9/SA24/SA54
[OUT1 Indicator/
OUT2 Indicator]
Turns ON when
OUT1 or OUT2 is ON.
[OUT1 Selection Indicator/
OUT2 Selection Indicator]
The indicator for the selected
output channel is lit.
[L/D Indicator]
Indicates the setting status:
Light-ON (L) or Dark-ON (D).
Executes Smart Tuning.
[ Tune Button]
[ L/D Button]
Used to switch
between Light-ON (L)
and Dark-ON (D).
Incident Level
White digital
display
[+−UP/DOWN Button]
Used to fine-tune the threshold or change
set values.
Threshold Level
Green digital display
[DPC Indicator]
Turns ON when Dynamic
Power Control is effective.
[ST Indicator]
Turns ON when Smart
Tuning is in progress.
[ MODE Button]
Used to switch between Detection
Mode and Setting Mode,
and used to switch between
OUT1 and OUT2.
[L/D Indicator]
Indicates the setting status:
Light-ON (L) or Dark-ON (D).
Executes Smart Tuning.
[ Tune Button]
[ L/D Button]
Used to switch
between Light-ON
(L)
and Dark-ON (D).
[OUT Indicator]
Turns ON when
the output is ON.
Incident Level
White digital display
[+−UP/DOWN Button]
Used to fine-tune the threshold or change set values.
[ MODE Button]
Used to switch between
Detection Mode and Setting Mode.
Threshold Level
Green digital
display
[DPC Indicator]
Turns ON when Dynamic
Power control is effective.
[ST Indicator]
Turns ON when Smart
Tuning is in progress.
[ZERO Indicator]
Turns ON while a zero reset is set.
[OUT1 Indicator/
OUT2 Indicator]
Turns ON when
OUT1 or OUT2 is ON.
Measurement
Value
White digital
display
[OUT1 Selection Indicator/OUT2 Selection Indicator]
The indicator for the selected output channel is lit.
[L/D Indicator]
Indicates the setting status:
Light-ON (L) or Dark-ON (D).
Threshold Level
Green digital
display
Executes Smart
Tuning.
[ Tune Button]
[ L/D Button]
Used to switch
between Light-ON (L)
and Dark-ON (D).
[+−UP/DOWN Button]
Used to fine-tune the threshold
or change set values.
[ST Indicator]
Turns ON when Smart
Tuning is in progress.
[ MODE Button]
Used to switch between Detection
Mode and Setting Mode,
and used to switch between
OUT1 and OUT2.
[ZERO Indicator]
Turns ON while a zero reset is set.
Measurement Value
White digital display
[L/D Indicator]
Indicates the setting status:
Light-ON (L) or Dark-ON (D).
Threshold Level
Green digital
display
Executes Smart Tuning.
[ Tune Button]
[ L/D Button]
Used to switch
between Light-ON (L)
and Dark-ON (D).
[OUT Indicator]
Turns ON when
the output is ON.
[+−UP/DOWN Button]
Used to fine-tune the threshold
or change set values.
[ MODE Button]
Used to switch between Detection
Mode and Setting Mode.
[ST Indicator]
Turns ON when Smart
Tuning is in progress.

Omron E3C-LD11 Specifications

General

Brand	Omron
Model	E3C-LD11
Category	Accessories
Language	English