1E3T
Miniature Square Photoelectric Sensor in plastic housing
E3T
• Precision pinpoint LED
• 3.5 mm thin flat shape or 6.6 mm side
view shape where space is crucial
•IP67
• Pulse synchronisation for high
ambient light immunity
Features
3.5 mm flat model with background supression (BGS) with highest repeatability even for differently coloured
objects.
Application
Object detection through small holes
• The precision pinpoint LED of the through-beam models
provides appropriate sensing distances for very precise and
reliable detection even through smallest slits and gaps with
e.g. 0.5 mm dia.
• The coaxial optics and the small focal lens of the
retro-reflective models allow the detection of small
(dia 2 mm) objects or through small holes (dia 2 mm).
Minimal black/white error Unique light receiving lens shape
for high precision alignment
New mounting technology for reliable background
suppression in 3.5 mm flat housing
E3T-FL1@
White paper Black paper
0
5
10
15
20
25
(mm)
Light receiving lens
Rear Front Side
Flip chip (IC)
Light receiving
element
To Next Page
Need help?
General
